Honda Acty Truck embroidered patch
$5.99
Approximate 2″ x 4″ embroidered patch with Honda Acty Truck. Sew on style patch with blue truck
Shipping
Shipping & Delivery
Vendor Info
Vendor Information
- Store Name: WILLpowered
- Vendor: WILLpowered
- No ratings found yet!
More Products
EFI kit for Acty MKI
This is a kit to switch your carbureted HA-3/4-HH-3/4 to fuel injection. During the development of this kit we have never had a truck not start even when we have had erroneous base settings. This has proven that it is ready to be sold for its number one purpose, curing any and all issues associated with the older carb models. This kit includes everything you need to switch to fuel injection associated with the engine bay. Other things you will need to make this kit work are a high pressure fuel pump such as the walbro 250 and an adjustable fuel pressure regulator. We have designed this kit around the AMP microsquirt ECU which is now included in the price, along with being preprogrammed with a base tune. The harness provided has been expanded to a full plug and play harness requiring no splicing. The necessary oxygen sensor and controller are provided which will need an oxygen sensor bung added to the exhaust. Our headers can be added on which include the bung already installed.
This kit includes:
6ft 6AN hose with straight fittings
(1) 6AN 90 degree fitting
Throttle body injection plate with gaskets
Properly sized injector
EGR delete plate with 1/8 npt hole
3 bar MAP sensor
IAT probe
Wire harness for aftermarket fuel pump that plugs into stock location
Coolant hose adapter
Coolant hose sensor
Longer studs to mount carb
AMP microsquirt ECU Base tune for Tunerstudio
Full wiring harness
Wideband O2 sensor with controller
Select options
This product has multiple variants. The options may be chosen on the product page
Cheap Acty Spark Plug Wires
These wires are the ones we were using previously that MAY RIP DURING REMOVAL!!!!!!! This is why they are $5. They work great installed and if you are careful while removing and pull from the black fitting they probably won’t rip, but you’ve been warned. For $5 it might be best just to get two sets. Honda Acty spark plug wires in red for HA-1/2/3/4 and HH-1/2/3/4. Our other sets are stronger and don’t rip but are more expensive.
Acty Brake Kit
Save even more on your Acty brakes when you buy our WILLpowered full brake kit. This kit includes everything you need to refresh your front and rear brakes in any HA-1/2/3/4 truck or HH-1/2/3/4 van. These work 100% as they should but the hole for the mounting screw is slightly off for ONLY the solid rotors. For this reason this batch of rotors and brake kits are discounted and sold AS-IS.
Cross drilled and slotted rotors fit 100% as intended and all holes align for mounting screws.
Kit includes:
(2) front rotors
(1) set of WILLpowered ceramic front brake pads
(1) set of rear brake pads
Select options
This product has multiple variants. The options may be chosen on the product page
Wideband O2 Sensor and Lite Controller
Honda Acty Plug and Play Stereo
This simple but effective bluetooth stereo fits perfectly into the single DIN location for a Honda Acty. The harness has been modified with connectors that plug directly into the Honda Acty wiring harness and therefore no cutting or splicing of wires is required for install. This plugs directly in Acty/Street harnesses but there are several different versions we have encountered and you must verify before ordering. Shown in the pictures you can see the 6/4 pin which is usually for a stock Clarion unit, a 4/4pin which is usually in 1994 and up trucks and a 4/2pin usually found in 1990-93 trucks. The Vans often have the 16 pin but it is also found in some trucks. Stock trucks only have a passenger 4″ speaker so if you install a drivers side speaker and run the wires you will simply connect to the second set of speaker wires on the harness. This harness will send a signal to stock driver side wires that dead end behind the steering wheel. The newest version of this stereo does not allow us to tap the back of the stereo for mounting like in our youtube video. You can still install this stereo very easily using the supplied metal cage like any aftermarket single DIN stereo. For an easy install please visit our Youtube page and watch our video and search single din stereo install for videos on the metal bracket. If you are unsure about what pin variation you have we can usually tell with a picture from your phone just reaching behind your stock stereo, no need to disconnect so please feel free to just ask.
Select options
This product has multiple variants. The options may be chosen on the product page
Related products
Acty Exhaust Header
Here it is, the WILLpowered exhaust header for the Honda Acty EO7A 660cc engines. This will work for both trucks and vans. Dyno tested for 1-2 hp if the only modification performed but more can be expected if you had a clogged catalytic converter. If this is the only exhaust modification you do the exhaust sound is slightly more throaty without really being any louder.
Comes with new gaskets for both ends
Deletes catalytic converter
Bolts to stock locations
Off-road use only
Honda Acty Carb Rebuild Kit
If you are having issues with your carburetor and low on power, we always recommend a deep clean of the carburetor as the first step. This kit has the seals and gaskets you need to make sure your carb is sealed back up and running. Other issues can be the solenoids found in our other product listings.
Honda Acty Custom Floor Mats
Set of (2) black custom floor mats for both driver and passenger sides. High quality carpeting was used with custom Acty embroidery on the drivers side sill panel. We offer fitments for both trucks with AC and without AC. These will also fit Acty/Street vans but will not include any mat for the rear.
Honda ACTY HA6 & HA7 Performance Intake w/ Upgraded Filter
Performance air intake for the 1999-2009 Honda ACTY HA6 and HA7 models, with the added bonus of a lifetime K&N air filter! This intake is made from cutting edge materials and 3D printing processes and is a direct bolt on upgrade! A standard, easily replaceable, 4 inch cone filter is used for maximum air flow and ease of maintenance.
The 2-in-1 design allows for maximum performance with minimal audible change in engine noises, or maximum sound out of your Kei truck when mobbing around town. The riot configuration tone is similar to a mid-range exhaust upgrade without the need to change the factory exhaust.
