Titanium wheel studs for Honda
$115.00
Titanium wheel studs that fit Honda branded vehicles but specifically designed for the Acty and Street. Lighter and stronger than our previous extended wheel studs they can be a unique addition to your vehicle. Laser etched with the Ryoku Kanji to symbolize the added strength.
Highly recommend using a wheel stud installer while installing otherwise you may damage whatever lugnut etc you are using for install.
Shipping
Shipping & Delivery
Vendor Info
Vendor Information
- Store Name: WILLpowered
- Vendor: WILLpowered
- No ratings found yet!
More Products
Billet Honda Acty Key
Custom CNC key made by and for WILLpowered Performance exclusively. This will work for all 80s/90s Hondas just like the 35117-SH3-013. Initial batch is raw metal; The next batch will come in the colors of red or black
Select options
This product has multiple variants. The options may be chosen on the product page
Willpowered Black T-Shirt
Select options
This product has multiple variants. The options may be chosen on the product page
Honda Acty Custom Leather Shift Boot
If you are looking for a custom look for your interior or if your rubber boot tabs are ripped this custom leather shift boot made specifically for the Acty is for you. The boot comes with a custom bracket to attach it to the interior plastic molding. If your center console has several broken plastic slits this may not work well for your application.
Made with real leather this custom boot is made by us in the USA and currently comes in black with Red, Blue or Gray stitching.
Select options
This product has multiple variants. The options may be chosen on the product page
Cheap Acty Spark Plug Wires
These wires are the ones we were using previously that MAY RIP DURING REMOVAL!!!!!!! This is why they are $5. They work great installed and if you are careful while removing and pull from the black fitting they probably won’t rip, but you’ve been warned. For $5 it might be best just to get two sets. Honda Acty spark plug wires in red for HA-1/2/3/4 and HH-1/2/3/4. Our other sets are stronger and don’t rip but are more expensive.
EFI kit for Acty MKI
This is a kit to switch your carbureted HA-3/4-HH-3/4 to fuel injection. During the development of this kit we have never had a truck not start even when we have had erroneous base settings. This has proven that it is ready to be sold for its number one purpose, curing any and all issues associated with the older carb models. This kit includes everything you need to switch to fuel injection associated with the engine bay. Other things you will need to make this kit work are a high pressure fuel pump such as the walbro 250 and an adjustable fuel pressure regulator. We have designed this kit around the AMP microsquirt ECU which is now included in the price, along with being preprogrammed with a base tune. The harness provided has been expanded to a full plug and play harness requiring no splicing. The necessary oxygen sensor and controller are provided which will need an oxygen sensor bung added to the exhaust. Our headers can be added on which include the bung already installed.
This kit includes:
6ft 6AN hose with straight fittings
(1) 6AN 90 degree fitting
Throttle body injection plate with gaskets
Properly sized injector
EGR delete plate with 1/8 npt hole
3 bar MAP sensor
IAT probe
Wire harness for aftermarket fuel pump that plugs into stock location
Coolant hose adapter
Coolant hose sensor
Longer studs to mount carb
AMP microsquirt ECU Base tune for Tunerstudio
Full wiring harness
Wideband O2 sensor with controller
Select options
This product has multiple variants. The options may be chosen on the product page
Related products
Acty Big brake kit
Here it is, a compete big brake kit with everything you need in one kit. Not only have we consolidated all the parts you need but we have been able to reduce the price compared to others considerably. For installation you can watch our YouTube video and don’t forget to put the bleed screw up which means the caliper labeled “R” will go on the left or passenger side and vice versa. This kit includes the following for pre-order with an expected ship date just before Christmas 2024:
(2) Red front calipers w/clips
(4) WILLpowered big brake ceramic pads
(2) Front rotors with black painted hubs
(2) WILLpowered brake spacers
(4) Extended length hex screws for rotors
(8) Extended length studs
Honda Acty Suspension Kit P-1
WILLpowered Honda Acty Suspension kit Phase 1! The top 2 things we do to a truck when we get it besides basic maintenance and our shift kit is these two parts right here. Stiffer springs give about 3/4-1″ lift in the front which levels the truck paired with WILLpowered strut rod bushings. Strut rod bushings get rid of the death wobble at 50mph but also improve steering and eliminate that metal slap sound when going over small bumps.
For a limited time get both of these essential parts at the same time and save!
WILLpowered glow face for Honda Acty
WILLpowered glow face gauges for the Honda Acty trucks and vans. These are overlays that attach with the same screws from the stock face. The gauges are set to MPH so you no longer have to convert the kmh while driving. Some twist in the face can be made to truly calibrate the speed after install but on our first try we had it within 1-2 mph and left it as is. For the tachometer face the temp and gas gauges are not lit but come with an adhesive backed piece for a matched look.
We have a new version called “No Tachometer Rounded” which is if your gas and temp gauges have rounded edges instead of a more straight down appearance. Please see pictures or call if you are not sure.
Please choose if you have a tachometer cluster or not. These will be plug and play using the dash clock harness so that the gauges will light up with your headlights. The harness will be slightly different if you have a clock already plugged in so please select if you do or don’t.