Shipping
Shipping & Delivery
Vendor Info
Vendor Information
- Store Name: WILLpowered
- Vendor: WILLpowered
- No ratings found yet!
More Products
Acty EGR delete plate
EGR delete plates for the Honda Acty by WILLpowered. These were designed for the 660cc carburetor intakes but may carry over to other models. There are two variations, one solid and one with a 1/8 npt threaded port. This port aligns with the return path to the intake so you can add a vacuum gauge, pressure sensor etc.
This also allows for several vacuum hose deletes but be sure to properly cap these lines to keep the engine running properly.
Select options
This product has multiple variants. The options may be chosen on the product page
Acty MPH conversion overlays
If you are happy with the glow of your stock gauges or just like the original look this option might be for you. Designed to look exactly like the stock speedometer these solid overlays will update your speed to mph with relative accuracy.
NOT a sticker
Select options
This product has multiple variants. The options may be chosen on the product page
Honda Acty Starter
Select options
This product has multiple variants. The options may be chosen on the product page
Honda Acty Rear Wheel Bearing Set
Honda Acty rear wheel bearing set with the option to buy to the inner cv trans seals at the same time. Often you will be removing the entire rear cv axle to get to these bearings so it is usually a good idea to have the trans seals on hand incase they get damaged while doing the job. Each wheel has 2 bearings, one on the inner and one on the outer.
Select options
This product has multiple variants. The options may be chosen on the product page
Front Struts for 3rd Gen Acty
These pressurized struts fit the third generation Acty trucks, vans and the Vamos van. It should be 1999 and up fuel injected models but if you are unsure please reach out to us before purchasing. Your old struts can be tired or just plain failed after so many years. These pair well with our 300# springs and can restore the ride to a stock feel. Sold as a pair
Related products
Coolant hose kit for Acty
Coolant hose kit for the HA-3/4 trucks from WILLpowered. New silicone hoses can replace the decades old rubber hoses that are leaking, dry rotted or that just look horrible. These come in Blue, Black and Red with an option for a full kit of 8 hoses or a “dress up” kit of the 4 most common and visible hoses.
Although 90% of vans will use all these hoses there are a few models that have one or two different hoses (models with floor heat etc). We would prefer you just don’t buy these for the van version to prevent passive aggressive social media comments.
WILLpowered glow face for Honda Acty
WILLpowered glow face gauges for the Honda Acty trucks and vans. These are overlays that attach with the same screws from the stock face. The gauges are set to MPH so you no longer have to convert the kmh while driving. Some twist in the face can be made to truly calibrate the speed after install but on our first try we had it within 1-2 mph and left it as is. For the tachometer face the temp and gas gauges are not lit but come with an adhesive backed piece for a matched look.
We have a new version called “No Tachometer Rounded” which is if your gas and temp gauges have rounded edges instead of a more straight down appearance. Please see pictures or call if you are not sure.
Please choose if you have a tachometer cluster or not. These will be plug and play using the dash clock harness so that the gauges will light up with your headlights. The harness will be slightly different if you have a clock already plugged in so please select if you do or don’t.