Coolant hose kit for Acty
$100.00
Coolant hose kit for the HA-3/4 trucks from WILLpowered. New silicone hoses can replace the decades old rubber hoses that are leaking, dry rotted or that just look horrible. These come in Blue, Black and Red with an option for a full kit of 8 hoses or a “dress up” kit of the 4 most common and visible hoses.
Although 90% of vans will use all these hoses there are a few models that have one or two different hoses (models with floor heat etc). We would prefer you just don’t buy these for the van version to prevent passive aggressive social media comments.
Shipping
Additional information
| color |
Black ,Blue ,Red |
|---|---|
| option |
Full Kit |
Shipping & Delivery
Vendor Info
Vendor Information
- Store Name: WILLpowered
- Vendor: WILLpowered
- No ratings found yet!
More Products
Honda Acty Front Strut
Honda Acty front struts for HA-3, HA-4, HH-3, HH-4. Your struts may be bad if during the stroke the rod jumps vice a smooth movement throughout. Leaking oil will also be a tell tale sign yours are bad.
New struts for Honda Acty trucks and vans. These are slightly pressurized and will fully extend on their own. Stock struts are only oil filled and don’t extend so these will provide more damping.
Regardless of what you find on the internet 51606-SJ7-014 will be on the right hand side (drivers side) while the 51605-SJ7-014 will be the left or passenger side.
Titanium wheel studs for Honda
Titanium wheel studs that fit Honda branded vehicles but specifically designed for the Acty and Street. Lighter and stronger than our previous extended wheel studs they can be a unique addition to your vehicle. Laser etched with the Ryoku Kanji to symbolize the added strength.
Highly recommend using a wheel stud installer while installing otherwise you may damage whatever lugnut etc you are using for install.
Coil On Plug for Acty HA6/7 & Vamos
The Vamos & Acty Ignition Coil/Direct Ignition Coils Set of 3 is a high-quality product manufactured by Willpowered. This set of ignition coils is designed to provide reliable and efficient performance for your minitruck or van. With three units included in the set, you can ensure that your truck or van is running smooth and consistent. These are sold as a full set of 3 coils.
Honda Acty Shift Bushing Kit
This is a custom made and sourced shift bushing kit for the Honda Acty/Street HA3/4 and HH3/4. Most of the play experienced in the old shifters is from the cup bushing, which is no longer produced. We have developed a replacement bushing and now offer it as a full shift bushing replacement kit. The full kit includes the cup bushing, six flange bushings, five thrust washers to replace the stock parts and use as shims (if necessary), two sleeve bushings, two cotter pins and grease. These kits will also fit the attack trim level and replaces all bushings in that model. Base bushings are now included as standard. Installation video is on our Willpowered YouTube channel.
BASE BUSHINGS ARE INCLUDED!!!
Just added is our shifter base bushings! Adding these thicker stiffer custom bushings to the base of your shifter still allows it to flex but stiffens it up for that crisper feel. Adds one minute to installation when performed with the shift kit.
Acty Brake Kit
Save even more on your Acty brakes when you buy our WILLpowered full brake kit. This kit includes everything you need to refresh your front and rear brakes in any HA-1/2/3/4 truck or HH-1/2/3/4 van. These work 100% as they should but the hole for the mounting screw is slightly off for ONLY the solid rotors. For this reason this batch of rotors and brake kits are discounted and sold AS-IS.
Cross drilled and slotted rotors fit 100% as intended and all holes align for mounting screws.
Kit includes:
(2) front rotors
(1) set of WILLpowered ceramic front brake pads
(1) set of rear brake pads
Select options
This product has multiple variants. The options may be chosen on the product page
Related products
Honda Acty Fuel Filter
Your fuel filter is probably 25 years old and allowing gunk into your carb stealing those precious few horsepower. Get this new filter installed not just for piece of mind but to keep you lines running clean.
*****UPDATE*****
After complaints we have switched suppliers so that the filter has the correct size nipple. Previous filters we sold (and others sell) have plastic nipples larger than stock and can make it almost impossible to get the fuel lines back on. 25 year old dried out rubber makes the issue even worse. From now on we will only sell the filters that are the correct size even if we have to charge a few dollars more.
Honda Acty pillar pod trim
Almost two years in the making, our Ronin Werks team has been working behind the scenes to develop these Acty pillar pod trims. We scanned real Honda trim that had been molded with pods to ensure an exact fit into your truck/van. Next, injection molding was the solution to get the quality and durability we insist on. The molding process creates a 95% finished product so customers may wish to paint, texture or trim the piece prior to final installation. We chose to keep the divers side a solid piece to maintain a finished look. To install the handle holes will need to be added prior to installation.
Honda Extended length wheel studs
Honda extended length wheel studs set of 8. Same ones that come with our big brake kit if you need longer studs to fit aftermarket rims etc. 45mm shank as opposed to the approx 25mm shank of stock studs.
UPDATE – previous studs on our site had 55mm of thread. These have 45mm thread and should be closer to what most people actually need.
