Honda Acty Rear Inner CV Joint
$295.00
New rear inner CV joint incase your cv is bad.
Shipping
Shipping & Delivery
Vendor Info
Vendor Information
- Store Name: WILLpowered
- Vendor: WILLpowered
- No ratings found yet!
More Products
Honda Acty Brake Spacers
Honda Acty big brake kit spacers so you can install EG civic brakes or better. These custom WILLpowered spacers go behind the rotors to give proper clearance to the bigger calipers. Don’t be fooled by copy cats, these are CNC’d to the proper thickness and not just cut from sheet metal.
Standard kits come with 4 hex head screws which are longer to attach the rotors to the hub. Longer wheel studs are optional but the hub may need to be removed or the knuckle notched to swap in place. Bigger brakes require a minimum of 13″ rims.
*****UPDATE***** Longer studs are now 55mm total length with 45mm of threads.
https://youtu.be/9rrGFRGw3Y4?si=uGWmoQhCquhqPM_5
Select options
This product has multiple variants. The options may be chosen on the product page
Fuel Injector DEKA IV, 40 lb/hr
Honda Acty Fuel Filter
Your fuel filter is probably 25 years old and allowing gunk into your carb stealing those precious few horsepower. Get this new filter installed not just for piece of mind but to keep you lines running clean.
*****UPDATE*****
After complaints we have switched suppliers so that the filter has the correct size nipple. Previous filters we sold (and others sell) have plastic nipples larger than stock and can make it almost impossible to get the fuel lines back on. 25 year old dried out rubber makes the issue even worse. From now on we will only sell the filters that are the correct size even if we have to charge a few dollars more.
Heavy Duty Coil Spring Set 300lbs
These are 300# springs that work best on a Honda Acty due to how the Unibody distributes it’s weight. You should get about 3/4 to 1 inch lift in the front that removes the stock rake, provides a little more room for larger tires and provide a much better feel. Although “stiffer” when hitting those driveway curbs etc you don’t get that bottom out feel like you do with stock. A simple and fairly inexpensive modification that you will appreciate every time you drive your truck.
Honda Acty Front Brake Rotors
Replace those rusty 25 year old rotors with these new ones. Fits all HA-3/4 trucks and HH-3/4 vans, sold in pairs (price is for 2 front rotors). The current batch of solid rotors ONLY has the holes for the mounting screw slightly misaligned. This means that the rotor will fit and work as it should but will ultimately be held on by just the rim and lugnuts (just like some other stock setups).
Cross Drilled rotors are designed for maximum efficiency under braking and look amazing while doing so. Mounting holes for Cross Drilled Rotors are 100% correct.
Select options
This product has multiple variants. The options may be chosen on the product page
Related products
24 mm coolant connector with a 25 mm lip and 1/8 npt fitting, 68 mm in length
The 24 mm coolant connector by WILLpowered is designed with a 25 mm lip and 1/8 NPT fitting, making it suitable for connecting coolant hoses in car and truck engines. With a length of 68 mm, this connector provides a secure and reliable connection for optimal engine cooling performance. Built to high standards of quality, this product is a durable and essential component for maintaining the engine cooling system in top condition.
WILLpowered glow face for Honda Acty
WILLpowered glow face gauges for the Honda Acty trucks and vans. These are overlays that attach with the same screws from the stock face. The gauges are set to MPH so you no longer have to convert the kmh while driving. Some twist in the face can be made to truly calibrate the speed after install but on our first try we had it within 1-2 mph and left it as is. For the tachometer face the temp and gas gauges are not lit but come with an adhesive backed piece for a matched look.
We have a new version called “No Tachometer Rounded” which is if your gas and temp gauges have rounded edges instead of a more straight down appearance. Please see pictures or call if you are not sure.
Please choose if you have a tachometer cluster or not. These will be plug and play using the dash clock harness so that the gauges will light up with your headlights. The harness will be slightly different if you have a clock already plugged in so please select if you do or don’t.
