Honda Acty Engine Gasket Set
Price range: $350.00 through $400.00
Shipping
Additional information
| option |
E05 E07 ,E07A |
|---|
Shipping & Delivery
Vendor Info
Vendor Information
- Store Name: WILLpowered
- Vendor: WILLpowered
- No ratings found yet!
More Products
6 AN x 2ft black hose with straight fittings
Honda Acty Magnetic Oil Plug
WILLpowered magnetic drain plug for the Honda Acty. Collect that ferrous material in between oil changes and some that has been having out for 25 years. Comes with a new crush washer and a 14mm wrench head.
Tighten till snug. One customer reported a plug breaking at 30ftlbs of torque, if using a torque wrench it should be below that.
May fit other brands but we have not confirmed which ones yet.
Honda Acty Radiator Cap All Models
Brembo brake keychain
Honda Acty Shift Bushing Kit
This is a custom made and sourced shift bushing kit for the Honda Acty/Street HA3/4 and HH3/4. Most of the play experienced in the old shifters is from the cup bushing, which is no longer produced. We have developed a replacement bushing and now offer it as a full shift bushing replacement kit. The full kit includes the cup bushing, six flange bushings, five thrust washers to replace the stock parts and use as shims (if necessary), two sleeve bushings, two cotter pins and grease. These kits will also fit the attack trim level and replaces all bushings in that model. Base bushings are now included as standard. Installation video is on our Willpowered YouTube channel.
BASE BUSHINGS ARE INCLUDED!!!
Just added is our shifter base bushings! Adding these thicker stiffer custom bushings to the base of your shifter still allows it to flex but stiffens it up for that crisper feel. Adds one minute to installation when performed with the shift kit.
Acty EGR delete plate
EGR delete plates for the Honda Acty by WILLpowered. These were designed for the 660cc carburetor intakes but may carry over to other models. There are two variations, one solid and one with a 1/8 npt threaded port. This port aligns with the return path to the intake so you can add a vacuum gauge, pressure sensor etc.
This also allows for several vacuum hose deletes but be sure to properly cap these lines to keep the engine running properly.
Select options
This product has multiple variants. The options may be chosen on the product page
Related products
Honda Acty pillar pod trim
Almost two years in the making, our Ronin Werks team has been working behind the scenes to develop these Acty pillar pod trims. We scanned real Honda trim that had been molded with pods to ensure an exact fit into your truck/van. Next, injection molding was the solution to get the quality and durability we insist on. The molding process creates a 95% finished product so customers may wish to paint, texture or trim the piece prior to final installation. We chose to keep the divers side a solid piece to maintain a finished look. To install the handle holes will need to be added prior to installation.
Honda Acty Stage 2-M
Here is our Honda Acty Stage 2-M(Maintenance) kit. Buy everything at same time and save BIG money. Thermostats aren’t catastrophic if they fail and some customers may have replaced them already so it is offered as an option as well as the shaft seals. The seals ride along the shaft and over many miles can create a very slight groove that is sealed as long as you don’t touch the seal. If you dont have oil leaking from the seals sometimes its best to just leave them alone. This kit is for anyone doing basic maintenance but targeted to those who have replaced the fluids and now want the peace of mind that the timing belt is new. All parts fit HA-3/4 and vans HH-3/4.
Kit includes:
(1) WILLpowered Acty water pump with o-ring
(1) Acty E07A timing belt by Mitsuboshi
(1) Acty E07A tensioner pulley
(1) Acty E07A idler pulley
(1) WILLpowered timing belt sticker
(1) Acty thermostat with Honda O-ring (optional)
(1) Acty Front crank seal (optional)
(1) Acty Cam shaft seal (optional)
Titanium wheel studs for Honda
Titanium wheel studs that fit Honda branded vehicles but specifically designed for the Acty and Street. Lighter and stronger than our previous extended wheel studs they can be a unique addition to your vehicle. Laser etched with the Ryoku Kanji to symbolize the added strength.
Highly recommend using a wheel stud installer while installing otherwise you may damage whatever lugnut etc you are using for install.
WILLpowered glow face for Honda Acty
WILLpowered glow face gauges for the Honda Acty trucks and vans. These are overlays that attach with the same screws from the stock face. The gauges are set to MPH so you no longer have to convert the kmh while driving. Some twist in the face can be made to truly calibrate the speed after install but on our first try we had it within 1-2 mph and left it as is. For the tachometer face the temp and gas gauges are not lit but come with an adhesive backed piece for a matched look.
We have a new version called “No Tachometer Rounded” which is if your gas and temp gauges have rounded edges instead of a more straight down appearance. Please see pictures or call if you are not sure.
Please choose if you have a tachometer cluster or not. These will be plug and play using the dash clock harness so that the gauges will light up with your headlights. The harness will be slightly different if you have a clock already plugged in so please select if you do or don’t.
